Dear Valued Customers, thank you for choosing Keenovo. Please apply coupon GF5W26S8M93Y for a special discount available only here.

How-to's

How to wire a Keenovo heater pad to your 3D printer via an SSR

Disclaimer: This post is for reference only. Electrical skills are required to read and understand this post. Please first read the post and decide...

How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate

One of our most frequently asked questions is :" what is the suggested/best setup/installation method of my Keenovo heater pad to my build plate?" ...

How to replace a thermistor

Sometimes, you may need to replace a malfunction thermistor that comes free with the heater. These could be some helpful tips:1) Cut the two small ...

How to remove from a 3M adhesive backing installation

Sometimes, you may need to remove a heater pad installed with an adhesve backing. Here below could be some helpful tips for this:1) Warm the adhesi...

How to connect a Keenovo heater pad to the Keenovo Digital Controller

It's simple to make the connection. Please connect the white wires from the heater pad to the two bare wires in red sleeve from the controller.As f...